#
Georgia Leisure
CALL NOW FOR A CONSULTATION 678-546-8618
 
Spa Services/Maintenance
We offer weekly, bi-weekly and monthly spa service plans.

Every spa service includes:
  • Water testing
  • Necessary chemical adjustments based on test results
  • Shock as needed
  • Clean tile and spa surface
  • Manually clean filters as needed
  • Check water level and advise customer to add if necessary
  • Advise customer of any potential problems
We also offer on call spa drain/clean/refill and repair services.

Call us now to set up an appointment for your spa service!
 
 
Custom Order Spa Covers for all makes and models of spas available in 16 different colors

Hot Tub Chemicals 101:  Keeping Your Hot Tub Clean

Sometimes dealing with the chemicals that are required to keep your hot tub water clean and well maintained can be a bit confusing. Relax. You don’t need an advanced degree in organic chemistry. Here's a primer that will help clarify the things you need to do to continue enjoying your hot tub in a safe, healthy manner.

An Introduction to Sanitizers

Sanitizing your hot tub water is the most important maintenance you can do for yourself. Why? Sanitizers kill the bacteria that can grow in warm water. Here's a quick rundown on the different types of sanitizers:

Chlorine: You're probably familiar with chlorine as the primary sanitizer used in pools. Chlorine can be used in a different concentration in hot tubs. There are chlorine granules created specifically for hot tub use.

Bromine: Bromine can be added to a hot tub in the form of tablets, nuggets or granules. Bromine needs to be activated with an oxidizer such as chlorine or Potassium Monopersulfate (non-Chlorine) shock to work.  Many people choose bromine over chlorine because bromine is an effective sanitizer in hot tubs as it doesn’t “gas off” at temperatures higher than 98 degrees but bromine produces more odors than chlorine. Bromine works in a wide range of pH levels. Bromine is generally distributed through a floating feeder or cartridge and it very important not to over brominate because this can lead to irritation of the skin. It is recommended to keep only 1 to 2 bromine tablets in your spa and check weekly.

Ozone: Ozone is an oxidizer and not a sanitizer, but it reduces the work of the sanitizers and lowers the level of sanitizers needed in the spa to keep it clean. The ozone process requires that your hot tub is equipped with a piece of equipment called an “ozonator.” Even if you have an ozonator, you will need to supplement your water with a low level of sanitizer like bromine or chlorine. (Don't let anyone tell you otherwise. The idea that a hot tub can be thoroughly sanitized with ozone alone is a myth.) Ozone is compatible with bromine, chlorine and mineral systems.

Mineral Spa Care: You can use mineral systems to assist, but not entirely replace, your sanitizers in keeping your hot tub clear of contamination. Mineral cartridges are typically placed inside your filter cartridge or are contained in a floating dispenser through which the sanitizing minerals are slowly released into the water over time. Many people prefer to use mineral sanitizers because of the lower levels of chlorine or bromine.

Important: Before adding any sanitizing agent to your hot tub, you must first test the current levels by using a test strip. Test strips are easy to use and formulated to measure the level of bromine, chlorine or mineral content in your hot tub water along with your pH levels and calcium levels. Depending on your sanitizer, you should add sanitizing agents as indicated by the test strip and the instructions on the sanitizer you are using.

Changing Your Water

Be sure to CHANGE YOUR WATER every 4 to 6 months depending on the amount of use of your hot tub. No amount of chemical additives can protect you completely in water that is old and dirty. You wouldn't wash your dishes in year-old dishwater would you? Changing water is a simple task and you, your family and guests will be glad you did.

Other Important Stuff

The following items are important, just not as important as your sanitizer.

Shock Oxidizers: This is a very useful product that oxidizes the water and helps to get rid of organic matter like dead skin, skin oils, cosmetics and lotions. Shock oxidizing your hot tub once a week starves bacteria and helps prevent cloudy water and a clogged system. It’s much better than the shock you can get from the expense that comes with not using it and creating bigger maintenance problems.

There are two types of shock, non-chlorine shock and chlorine shock. Both work as a good maintenance product to oxidize your spa.

For fresh water fills, use a chlorine shock. Chlorine shock is a sanitizer and will leave chlorine residual, which is critical to a clean, safe spa. A non-chlorine shock works great once you have an established a residual of chlorine or bromine in the spa as it can oxidize organics in the water without increasing your sanitizer residual. It also allows you to use the spa soon after treatment. Be sure to follow chemical manufacturers’ instructions for proper use.

pH: OK, let's start with the obvious question. What is pH? Water pH is a measurement of the concentration of hydrogen ions in your hot tub water. Without getting into a freshman chemistry lesson, let's just say that pH is important because if you don't keep the pH levels within a small range (7.2-7.8), your water can become too alkaline or too acidic. If your pH is too low (less than 7.2), the water is too acidic and it can corrode parts of your hot tub, especially your internal plumbing like your jets, fittings, rubber gaskets and seals and irritate your skin. You might notice that some of your jets start popping out or show signs of discoloration. If your water is above 7.8, it is too alkaline which can cause "scaling" from minerals and metals in your water forming deposits and possibly stains on your hot tub's acrylic surface. So, how do you know if your pH is in the right zone? First you need to test your water using a test strip. Then, use pH additives to achieve the right pH balance.

More Useful Information

So far we've covered the most important stuff, sanitizing, shocking and pH balancing but here are some other situations to be aware of

Alkalinity control: Total alkalinity refers to the ability of the water to resist changes in pH. Controlling alkalinity can help keep your pH in the appropriate range thereby lessening the need for pH balancing.

Heavy Metal: Some local water contains unusual amounts of iron or copper. A greenish tint in your water may indicate the presence of these metals. If this is the case in your area, resist the temptation to file for mining rights. These pesky metals can, among other things, stain your hot tub shell, increase your sanitizer consumption or foul your tub’s water heater. Fortunately, you can control metals by using an additive when you change your water.

Cleaning Your Hot Tub

Cleaning Your Hot Tub Filter

As mentioned in our Hot Tub Filters section, it's highly important to keep you hot tub filter clean and it’s something you should do at least monthly. We recommend that you clean your filter with a good specialized hot tub filter cleaner a few times before it gets so bad you need to toss it out.

Preventing the Dreaded Hot Tub Scum Ring and/or Tub Foam

It is very important to keep oils out of your hot tub water. These oils can come from a variety of sources. Body soaps or lotions, hand cream, deodorant, hair gel or make-up. The best way to keep oils out of your hot tub is to rinse off, without using soap, before entering your hot tub, just like your local pool or health club recommends.

You can also get foam in your hot tub. This is caused by an accumulation of detergents in the water from oils or soaps. These detergents usually come from shampoo in the hair, detergent or fabric softener used in bathing suits. It is recommended to rinse off, without using soap, and keep your hair out of the water.

The first line of defense is regular water replacement and proper sanitation. A defoamer can be used to suppress the foam but will not remove it from the water. If the foam persists, you might be better suited to drain your hot tub and start off with fresh water. It might cost more in chemicals and time than it is worth. If it’s too late and you’re already a scum victim, use a multi-purpose spa surface cleaner and a cleaning pad or clean cloth that will not scratch the acrylic surface of your tub.

Cleaning Your Hot Tub Cover

Use a cover care product at least once per month. Find one that has UV protection and is good for cleaning and conditioning your cover.

Putting It All Together

We hope our “Hot Tub Chemicals 101” has cleared up a few things for you. The main thing is to be aware of the fact that a hot tub does not maintain itself. It's up to you. Meanwhile, please let us know if you have any special tips or ideas for this section that we might use in the future. We're always looking for ways to let others do our work for us so we can take off early and enjoy more tub time!

This section was prepared for Georgia Leisure, a leading retailer of spas/hot tubs, hot tub filters, chemicals and custom spa covers. The content was reviewed for accuracy by members of the Hot Tub Council./p>

Georgia Leisure  |  2397 Mall of Georgia Blvd.  |  Buford, GA 30519  |  678-546-8618  |  Fax: 678-546-3507  |  info@GALeisure.com
Site Powered By
    makeitloudsites.com
    Online web site design